Prime Dental Dentfilloy 68% - 30gm

Prime Dental Products Pvt Ltd, E-8, Shree Arihant Compound, Unit no 7-10, Thane Bhiwandi road, Kalher-421302

• PREPARATION OF CAVITY -
• For successful amalgam restoration it is most essential to prepare the cavity with adequate undercuts and the cavity should be dry.
• TRITURATION -
• The objective is to achieve a workable mass of amalgam with a minimum time. Amalgam may be achieved by the mechanical amalgamator or mortar and pastle. The amalgam should be free of excess of mercury before condensation.
• CONDENSATION -
• Remove dentfilloy from the mortar and start compacting without delay in the prepared cavity. Condensation is a continuation of the trituration process. Condensation should be done within 3 and half to 4 minutes of trituration. Further condensation effort after 4 minutes may create cracks in the matrix. Carving Now amalgam should be ready for carving. Carving should be completed in 5 minutes of condensation. Any carving against resistance of setting mass is not advisable. Finishing & Polishing Wait for 24 hours after filling to start polishing. Finishing can be done at low speed with special abrasive or with steel finishing bur to be followed by polishing paste.

• Dentfilloy can be used for restoration of class I, class II and pit filling in posterior teeth.
• PROPORTIONING OF ALLOY AND MERCURY - Proportioning should be done by weight and not by volume. Minimum mercury or 1 ratio 1 will have obvious advantage.

• Contents 68% Silver.
• Fine grain lathe cut.
• Quaternary silver filling alloy.
• Excellent strength.
• Easy carving.
• Excellent polish.