Ketan Turboclave FL17 Class B Autoclave - 17ltrs
- Buy 2 for ₹160239 each and save 3%
Pre - Vacuum (for Class B only)
Vacuum Turbo Clave is designed to get efficient pre-vacuum condition in order to achieve better sterilization result.
Post - Vacuum (for Class B only)
- Vacuum Turbo Clave post vacuum is designed in such a way to get better drying. Air Leakage Test (for Class B only)
- Vacuum Turbo Clave has inbuilt program to confirm air leakage rate is as per requirement of EN13060:2004.
Bowie -Dick Test (for Class B only)
Vacuum Turbo Clave has inbuilt program for Bowie-Dick Test packs to determine performance efficiency as per requirement of EN13060:2004.
Process Challenge Device Test (for Class B only)
Vacuum Turbo Clave also passed Process Challenge Device Test for hollow loads according to requirement of EN13060:2004.
Recorder Printer (for Class B only)
Vacuum Turbo Clave can print out all parameters viz. sterilization pressure, sterilization temperature, sterilization time and dry time etc, with year / month / day / hour / Error Messages, Cycle time, various phases etc.
- Package programs to sterilize packed articles sterilization temperature : 134 degree C, sterilization time : 4 minutes & dry time : 15 minutes.
- Instrument programs to sterilize metallic devices sterilization temperature : 134 degree C, sterilization time : 4 minutes & dry time : 15 minutes.
- Rubber programs to sterilize rubber & plastic sterilization temperature : 121 degree C, sterilization time : 20 minutes & dry time : 15 minutes
- Liquid programs to sterilize liquid sterilization temperature : 121 degree C, sterilization time : 20 minutes & dry time : 15 minutes.
Manual program as per user requirements program can set pre vacuum, post vacuum sterilization temperature : 121 degree C - 134 degree C, sterilization time : 1 - 60 minutes, dry time : 1 - 60 minutes.
One Den Med Pvt Ltd B601 Universal Paradise Nanda Patkar Road Vile ParleE Mumbai Mumbai Maharastra 400057 India
- Manufacturer/Importer warranty of 12 Months applicable for this product.
- Service and Warranty are handled by the manufacturer/importer directly for this product.
- PinkBlue will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer.
- PinkBlue and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties.
- Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and not PinkBlue.
- However, PinkBlue may assist the customer in lodging a complaint to get the Product replaced or serviced.
- The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact.
|Chamber size||225mm Dia x430mm Depth|
|Reservoir Capacity||3 Litre|
|Loading Tray||3 Nos. 150mmx380mmx14mm|
|Source of Power||220V 50/60Hz, 15A|
|Power Consumption||1800 W|
|Temperature Range||121 degree C (1.1bar)-134 degree C (2.1bar)|
|Digital Pressure Display||Yes|
|Dry System||Vacuum Heat Drying|
|Control System||Automatic Micro Processor Based|
|Display Type||LED Display|