Dental Avenue AvueBite (2 x 50ml)

Dental Avenue India Pvt Ltd 28 B Udyog Vihar PhaseV NCR Gurgaon Haryana 122016 India

Preparation:

• Ensure the patient's mouth is clean and dry.
• Verify that all necessary instruments and equipment are ready for use.

Dispensing:

• Attach the special Rubber Duck mixing tips securely to the AvueBite cartridges.
• Dispense equal parts of both components (A and B) onto a mixing pad or suitable surface.

Mixing:

• Utilize the attached mixing tips to thoroughly combine components A and B.
• Mix until a consistent color is achieved, ensuring no streaks or inconsistencies.

Application:

• Load the mixed material onto a bite tray or any chosen registration method promptly.
• Seat the tray comfortably within the patient's mouth, allowing for a natural bite.

Bite Registration:

• Instruct the patient to bite down with a firm, even pressure to capture the occlusal relationships.
• Maintain stillness during the material's setting time for optimal results.

Setting Time:

• AvueBite has a setting time of 80 seconds. Ensure adequate time for the material to fully set before removing the tray from the patient's mouth.

Removal:

• Gently remove the set impression from the patient's mouth, taking care not to distort the captured details.

Inspection:

• Examine the bite registration for accuracy, ensuring that all necessary details are captured with precision.

Cleaning:

• Clean any excess material from the patient's mouth using standard dental cleaning procedures.

Documentation:

• Record the bite registration details for future reference in the patient's dental records.

Storage:

• Store AvueBite cartridges in a cool, dry place, following manufacturer recommendations to maintain product integrity.

• Addition silicone for precise bite registration.
• High-end hardness for accurate results.
• Rapid 30-sec working time, 80-sec setting time.
• No resistance or rebound during articulation.
• Rigid material resists compression forces.
• Special Rubber Duck mixing tips included.
• Uniform spreading reduces material wastage.