D-Tech Lute Plus Strontium Glass Ionomer Cement

D Tech Dental Technologies 61Reality Warehousing Gat No 13371 Pune Nagar Road Wagholi Pune 412207 India

Surface Preparation:
Thoroughly clean and dry the enamel and dentin surfaces before application.

Powder Preparation:
Shake the powder bottle gently to ensure uniform blending of the contents.

Dispensing:

Dispense 1 full scoop of powder onto a mixing pad or glass slab.

Dispense 2 drops of liquid next to the powder. Ensure the dropper is held vertically for accurate dosing.

Mixing:
Gradually incorporate the powder into the liquid in small portions. Mix briskly to achieve a smooth, homogenous consistency.
Note: Total mixing time should not exceed 45 seconds.

Application:
Apply the mixed cement immediately in a uniform layer while it remains glossy.

Working Time: Approximately 1.5 to 2 minutes from the start of mixing.

If the mix loses its gloss and becomes dull, discard it and prepare a fresh mix.

For extended working time, use a cool, dry glass slab for mixing.

Cleanup:
Remove excess cement promptly using a cotton roll or suitable instrument before it sets.
Carefully clean all surrounding areas, including the gingiva and adjacent teeth, prior to final setting.

• Cementation of metal-based crowns, bridges, inlays, and onlays

• Luting of high-strength all-ceramic crowns and bridges

• Cementation of metal-based and high-strength ceramic restorations on implant abutments

• Luting of metal root posts and indirect metal post-core build-ups

• Cementation of prefabricated stainless steel crowns

• Attachment of orthodontic bands

• Can be used as a base or liner under restorative materials

• Low Post-Operative Sensitivity: Biocompatible formulation reduces the risk of discomfort after placement.

• Fluoride Release: Provides continuous fluoride release for enhanced caries prevention and long-term protection.

• Strong Adhesion: Delivers excellent chemical bonding to both dentin and prosthetic surfaces for a secure fit.

• Ultra-Thin Film: Fine particle size (d50 – 5 microns) ensures a smooth consistency, excellent flow, and minimal film thickness for optimal crown seating.

• Extended Working Time: Remains in a fluid state for up to 2 minutes after mixing, allowing sufficient time for accurate loading and placement of restorations.

• Accurate Dispensing: Metered dropper system ensures consistent powder-to-liquid ratio (1 scoop tapped powder to 2 drops liquid) for precise and reliable mixing.

• High Radiopacity: Enhances visibility on radiographs, making post-operative assessments easier and more accurate.

• Pharma-Grade Glass Packaging: Powder is securely packed in an impermeable pharmaceutical-grade glass bottle with a tight-seal cap to maintain material integrity.