Dentsply Zelgan Advanced Alginate Powder Impression Material

Dentsply India Pvt. Ltd., Khasra No. 66/20 & 66/11/2, Gali no 2, Mundka Industrial Area, Delhi-110041

Mixing Time: 60 secs

Working Time: 30 secs

Setting Time: 2 min 30 secs

Setting time in Mouth: 60 secs

Preparation:

• Ensure that you have all the necessary materials ready, including the alginate powder, water, measuring scoop, mixing bowl, spatula, and appropriate trays.
• Clean and dry the trays that will be used for the impressions.
• If desired, apply alginate tray adhesive materials to the trays to enhance the adhesion of the impression material.

Mixing:

• Measure the appropriate amount of alginate powder using the provided measuring scoop. Follow the manufacturer's instructions for the recommended powder-to-water ratio.
• Fill the mixing bowl with the required amount of clean water at the recommended temperature. The temperature may vary depending on the specific instructions provided by the manufacturer.
• Slowly add the alginate powder to the water while continuously stirring with the spatula. Mix thoroughly to ensure a homogenous and smooth consistency.
• Continue mixing for the recommended time specified by the manufacturer to activate the alginate material properly.
• Ensure that the powder is completely incorporated and free of lumps. The special formulation of the powder eliminates dust during mixing.

Loading the tray:

• Once the alginate material is mixed, quickly load it onto the prepared tray. Fill the tray evenly and smoothly to avoid any air bubbles or voids.
• Place the loaded tray into the patient's mouth, ensuring proper alignment with the dental arches.
• Instruct the patient to bite down gently and maintain the position until the impression material sets.

Setting and removal:

• Allow the impression material to set according to the manufacturer's instructions. The setting time will depend on the specific formulation of the alginate material.
• Once the material has set, gently remove the tray from the patient's mouth. Take care to maintain the integrity of the impression and avoid any distortion or damage.

Inspection: 

• Carefully examine the impression for accuracy, ensuring that all necessary details have been captured properly. Check for any areas that may require re-impression or touch-ups.

Rinse and Disposal: 

• Rinse the alginate impression under running water to remove any debris or saliva.
• Dispose of the used alginate material and mixing utensils according to appropriate infection control protocols.

Easy to mix and handle

Requires minimal equipment

Cost-effective

Ensures patient comfort

Delivers accurate results with proper technique

Captures fine surface detail, even with saliva present

Maintains hygienic standards

Readily accessible

Pleasant taste and odor