D-Tech Cal-Plus

D Tech Dental Technologies 61Reality Warehousing Gat No 13371 Pune Nagar Road Wagholi Pune 412207 India

1.As a cavity base: Clean and dry the cavity.Emerge the paste from the syringe. Then gently tap the needle into the cavity dotting the base with pinpoints of the emerging paste and use the needle end as an applicator to spread it over the cavity base.Only a very minute quantity of CAL-PLUS is necessary to cover the cavity base direct a vigorous stream of warmed air on the paste so applied.This will spread it in a uniformly thin layer over the base surface which will then dry in a matter of seconds.Any excess of paste will be blown onto side walls of the cavity without harm. For rapid drying in the cavity,CAL-PLUS must be deposited in a uniformly thin layer.

2.As a base for deep cavities: Where removal of considerable decay and softene dentine has resulted in a cavity of considerable depth , CAL-PLUS provides thermal insulation under the filling material. When such a protective cushion is needed several thin layers of CAL-PLUS should be applied taking care each layer has first dried before applying the next one. Use the technique described above to spread each individual layer evenly. Each such thin layer will dry in a matter of seconds. Build up this CALCIUM HYDROXIDE cushion to desired thickness to provide an effective thermal insulation of the pulp as well as its chemical protection.

3.Endodontics: As a temporary filling material of root canal CAL-PLUS should be applied with rotary paste filler.

• Pulp capping
• As a cavity base
• As a neutralizing agent or protecting dentine against chemical or thermal reaction

PRECAUTION:

• After each use of syringe use disinfecting solution and small cotton pad to thoroughly clean needle applicator.
• Do not expose to air for long time the TIP MAY DRY. If it dries, clean it with a sharp needle.

Store in cool dark place. Keep away from direct flame.

• Ready to use
• Water based paste
• Highly alkaline