Total Etch Adhesives

View as Grid List

10 Items

per page
Set Descending Direction
  1. Vericom Denfil Etchant Gel 37%

    From ₹650

    As low as ₹650

    Fast Effect
    Easy Removement
  2. Vericom Care Etch Etchant

    From ₹650

    As low as ₹637

    Semi Gel Etching Agent With 37% Phosphoric Acid
    Silica Free
  3. Ivoclar Vivadent TE-Econom Bond Refill 5g
    12%
    Ivoclar Vivadent TE-Econom Bond Refill 5g
    Regular Price ₹1062 Special Price ₹932
    One-bottle, one-layer adhesive
    High bond strengths
  4. Ivoclar Vivadent Eco - Etch Refill 2 x 2gm
    12%
    NEW
    Ivoclar Vivadent Eco - Etch Refill 2 x 2gm
    Regular Price ₹753 Special Price ₹666
    As low as ₹612
    Phosphoric acid gel
    Total-etch technique
    Out of Stock
  5. SDI Super Etch 12g Syringe
    8%
    SDI Super Etch 12g Syringe
    Regular Price ₹920 Special Price ₹848
    As low as ₹778
    Selective enamel etching
    Blue tint gel
    Out of Stock
  6. Maarc HF ( hydrofluoric acid) gel
    27%
    NEW
    Maarc HF ( hydrofluoric acid) gel
    Regular Price ₹1250 Special Price ₹911
    As low as ₹837
    9.6% Porcelain Etching Gel
    Better Stability
    Out of Stock
  7. DenOR DenCera Etch
    8%
    NEW
    PREMIUM OFFER
    DenOR DenCera Etch
    Regular Price ₹850 Special Price ₹786
    As low as ₹721
    9.6% Hydrofluorice Acid
    Etching agent for porcelain
    Out of Stock
  8. FGM Condac

    From ₹797

    As low as ₹733

    low - viscosity gel
    Presents Excellent Results in Etching of the Enamel and Dentin
    Out of Stock
  9. Meta P&Bond (5th Generation system)
    37%
    Meta P&Bond (5th Generation system)
    Regular Price ₹1176 Special Price ₹745
    Superior bonding strength
    One-step priming and bonding
    Out of Stock
  10. Maquira Adhesive Bond 2.1
    40%
    Maquira Adhesive Bond 2.1
    Regular Price ₹1200 Special Price ₹719
    Easy-to-use
    Quick system
    Out of Stock
View as Grid List

10 Items

per page
Set Descending Direction

Buy Total Etch Adhesives Online in India

 

TOTAL ETCH ADHESIVES:

Ever since the demonstration of intra oral adhesion by Michael Buonocore in 1955, various bonding agents have been developed to enhance the adhesion direct restorative materials to the tooth surface. The initial bonding systems used in dentistry consisted of multiple steps to clean and condition the prepared tooth surface and increase the restoration-tooth interface. The total etch adhesive system was the first used system of dentin and enamel adhesion. They are also called the “etch and rinse” systems as they include a step of rinsing the prepared cavity with water to remove the etchant that is applied. The newer bonding system known as the self-etch system had been developed to eliminate this rinsing step as it was thought hinder polymerization and the physical properties of the final restoration.

 

What are the generations of total-etch adhesives?

Bonding systems have been classified by van Meerbeek et al into various generations. This classification is based on two general approaches to etching, priming and application of the bonding resin. There are two generations of bonding agents that come under the total etch adhesive system.

 

4th Generation Adhesives:

Three step adhesive system 

The fourth-generation adhesive systems were a widely used method of bonding in dentistry. They consisted of three steps:

  • Etching
  • Priming
  • Application of bonding agent

The acid etchant was applied onto the prepared tooth surface to create minute pores. This results in a chalky white appearance of the teeth. The next step consists of application of a primer to the etched tooth surface. The primer conditions the tooth surface before the bonding agent is applied. The final step consisted of the application of bonding agent to the etched and primed surface and light curing that results in the resin polymerizing inside the microporosities created by etching. These are known a resin tags. The formation of resin tags completes the process of bonding and the composite resin is applied in increments and light cured

Examples of fourth generation adhesives –

  • Adper Scotchbond Multipurpose      - 3M ESPE
  • All Bon   d                                             - Bisco
  • DenTASTIC All Purpose                    - Pulpdent
  • Gluma Solid Bond                               - Heraeus Kulzer
  • Optibond FL                                          - Kerr
  • Syntac                                                    - Ivoclar Viavadent

 

5th Generations Adhesives: 

Two step adhesive system

This generation of bonding agents were developed keeping in mind the aim to simplify the process and reduce the amount of time taken for bonding. The fifth-generation adhesive systems consisted of only two steps:

  • Etching 
  • Prime and Bond

 

This was done by incorporating the primer and bonding resin into a single bottle. The prepared surface is etched with phosphoric acid and rinsed away. Then next step consists of application of the components of the second bottle i.e the primer and bonding agent, followed by light curing of the same. This reduced time taken for achieving an adequate bonding to the tooth surface.

 

Examples of fifth generation adhesives -  

  • Excite                                                     - Vivadent
  • Gluma Comfort Bond                          - Heraeus Kulzer
  • One-Step Plus                                      - Bisco
  • PQI                                                         - Ultradent
  • Prime & Bond NT                                 - Dentsply
  • Single Bond                                          - 3M ESPE

 

Efficacy of the Etch and Rinse Strategy: 

The etch and rinse method of bonding has been a very effective method of adhesion in dentistry that delivers an efficient and stable bond to enamel. Enamel which is more mineralized than dentin can withstand the effects of etching and provide very good results with bonding agents. However, when dealing with the dentin, bonding has been more difficult using the etch and rinse technique. This is due to the organic characteristics of the dentin. Therefore, it is less predictable than. Treatment with phosphoric acid exposes the collagen network in the dentin, which is nearly devoid of hydroxyapatite. Bonding is achieved when the resin infiltrates the collagen mesh and forms a hybrid layer. The hybrid layer provides micromechanical retention to the final restoration. In the two-step category, hydrophilic and ionic monomers are combined to result in a not so hydrophobic resin layer. This leaves the layer susceptible to degradation by water, which greatly reduce durability of the bond. Thus, the etch and rinse technique is highly beneficial in cavities which are surrounded by enamel.  But when dealing with cavities in dentin, this can be highly technique sensitive.

 

What are the brands selling total etch adhesives online in India?

3M ESPE, Ultradent, Ivoclar Vivadent, SDI, Meta, Heraeus Kulzer, GC, DPI, Deor, DMP, Anabond, Shofu, MAARC, Tokuyama and Kuraray are a few of the many brands that sell total etch adhesives online at PinkBlue.in

 

Why buy total etch adhesives at PinkBlue.in?

With such a great variety of products that are developed to improve adhesion in dentistry, it becomes difficult to select the one that might best suit your need. PinkBlue has an excellent, well categorized and comprehensive catalogue that aids every dentist to choose the products that are suitable for them. With the best prices online, you can earn cashback points on every order. Change the way you shop for dental supplies with PinkBlue.in.