Dentsply X-Smart Endomotor
The X Smart Endomotor by Dentsply is the among the best endodontic micromotors designed specifically to drive nickel titanium (NiTi) rotary files . This simple, compact and lightweight device can be adapted to the needs of your endodontic practice. X Smart operates on a battery or electrical power. The battery takes about 5 hours to reach full charge and offers 2 hours of use time.
The LCD screen offers a clear display and is angled to facilitate easy visualization during the biomechanical preparation of the root canal. The various settings available on the device can be used to control the speed, torque, gear ratio, direction of file rotation and the auto reverse function. 9 programmable settings are available on this smart device to personalize the settings on your endomotor. In addition to this, there appears graduated bar, which denotes, in real time, the load being applied to the rotary instrument and audible warning indicators.
The handpiece supplied with the endomotor is a 16:1 contra-angled handpiece. It can be operated with or without a pedal. You can purchase the foot control separately to suit your individual preferences. The handpiece weighing 92g has an integrated on/off switch to control its functioning.
Manufacturers warrant products to the original purchaser against defects in material and workmanship under normal practices of installation, use and servicing.
The X Smart control unit, motor handpiece and contra angle are guaranteed for 24 months from the date of purchase.
The accessories (battery, stand) are not covered under the warranty.
In case the product fails within 30 days from the date of installation, immediately contact your dealer (have relevant proof of purchase ready)
- Battery or Electrically operated
- Battery Recharge Time – 5 hours approx.
- Battery Use Time – 2 hours approx.
- 16:1 compact Contra-angled handpiece.
- Can be operated with or without foot pedal
Only the contra angle needs to be sterilized and the recommended method is autoclave sterilization. The contra angle is autoclaved for 18 min at a temperature of 134oC. The control unit, the micromotor (handpiece), including all wires may be wiped with a cloth slightly dampened with water or non-alcoholic disinfectant.
Technical Features of Dentsply X Smart Endomotor
120 – 800 rpm
0.6 – 5.2 Ncm
On/Off Button or Foot Pedal if connected
Auto Reverse Function
Yes (with volume control)
Battery Recharge Limit
Product Dimensions and Weight
W98 x D152 x H139mm
Ø 20 x L108mm
92g (including motor handpiece cord)
W70 x D110 x H58mm