3M Unitek Transbond MIP Primer Bottle (712-025)

3M India Limited, 48-51 Electronic city, hosur road, Bangalore-560100

• Prepare the tooth surface by etching it with an appropriate dental etchant according to standard orthodontic bonding procedures.
• Rinse the etchant thoroughly and ensure the tooth surface is clean and free from debris.
• Apply a small amount of Transbond MIP Primer from the bottle onto the etched surface using an applicator brush.
• Ensure even coverage of the primer across the entire etched area.
• Allow the primer to dry for the recommended time specified by the manufacturer.
• Once the primer is dry, proceed with applying the orthodontic adhesive (e.g., Transbond XT Light Cure Adhesive or APC Adhesive Coated Appliance System) according to the manufacturer's instructions.
• Place the orthodontic appliance or bracket onto the primed and adhesive-coated tooth surface and position it correctly.
• Cure the adhesive using an appropriate curing light following the recommended curing time.
• Remove any excess adhesive and clean the surrounding area.
• Verify the bond strength and adjust the appliance as necessary.

• Moisture Insensitive Primer means not physically or chemically sensitive to small quantities of moisture
• Clinically, it means after rinsing and thoroughly removing etchant, drying of tooth surface before priming is not required
• Transbond MIP works with Transbond XT and LR capsules, Transbond XT syringes, and APC Adhesive Coating System
• Transbond MIP primer has been qualified for both Concise and Unite Chemical Cure Adhesives as well as Sondhi Rapid Set Indirect Bonding Adhesive

• Hydrophilic formulation designed for moist environments

• Single-coat application for faster, more efficient use

• Ensures reliable bond strength even in the presence of moisture

• Compatible with a wide range of orthodontic adhesives

• Contributes to reduced chair time and increased clinical efficiency